Contains:  Gear
ETOASI adapter, Andreas Dietz
ETOASI adapter, Andreas Dietz

Description

Here is my new Sony E-Mount to ASI adapter! It's still in the prototype phase, but the first light was already successful:

http://www.astrobin.com/298578/

The available flange back distance of E-mount is 18mm vs the 12.5mm of the ASI camera, and the E-mount flange protrudes 5.0mm into the adapter. So there was no room for a T2 adapter and I had the idea of a 3-point screw clamp fixture. The part was printed by my standard 3D printing service, in a really high accuracy and precision. The only work that had to be done was to cut the three threads into the predefined holes.

This adapter is released as an open-source hardware device, it is hosted here: https://www.thingiverse.com/thing:2550816

Contributors welcome!

Comments

Revisions

  • Final
    ETOASI adapter, Andreas Dietz
    Original
  • ETOASI adapter, Andreas Dietz
    B
  • ETOASI adapter, Andreas Dietz
    C
  • ETOASI adapter, Andreas Dietz
    D
  • ETOASI adapter, Andreas Dietz
    E
  • ETOASI adapter, Andreas Dietz
    F

F

Description: The new adapter, attached to my DIY Samyang E-Mount filter holder :-)

Uploaded: ...

Histogram

ETOASI adapter, Andreas Dietz

In these collections

DIY stuff