|
So I'm looking for an adapter that threads onto the outside of my 1.25" focuser, like my T-ring does, but will then accept a 2" field flattener. Basically my scope has a 1.25" focuser and in order to use a field flattener, the only one I could find was 2". I contacted Orion and they suggested finding a third party adapter to try and make it work. Does anyone know if this part exists and where I could find one?
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
|
I've found a 1.25" to 2" adapter but that slides into the focuser and would obstruct part of the view and that is what I'm trying to avoid.
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
|
My suggestion would be to reach out to Anthony at ADM Accessories. If Anthony doesn't have something that will work, he may be able to make something for you. http://www.admaccessories.com |
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Michael Southam:
My suggestion would be to reach out to Anthony at ADM Accessories. If Anthony doesn't have something that will work, he may be able to make something for you. http://www.admaccessories.com
Thanks! I sent them an email.
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
1.20
1.20
