0.00
#...
·
 |
|---|
|
Hello everyone I'm setting up my gear, and as of now i have: AZ GTi Nikon DSLR+various lens and soon an ED72 QHYCCD 5-II-C+guidescope i'd like to control my setup via N.I.N.A. is possible guiding my mount via PHD2 via Wi-Fi? any suggestions/tips are appreciated! Kind Regards Diego |
7.75
#...
·
|
|---|
|
Hi, you may watch these videos: HOWTO: Make a POWERFUL smart TELESCOPE! Better than much bigger telescopes! - YouTube PHD2 Autoguide of AZ-GTi Mount by Various Camera Drivers. - YouTube Please note: If you want to use AZ-GTI in Alt-Az Mode your exposure time will be limited by field rotation My tipp - being a beginner myself - take it one step at a time and start in Alt-Az mode with short exposure times and improve your experience from there. Have fun and clear skies Wolfgang |
0.00
#...
·
|
|---|
is possible guiding my mount via PHD2 via Wi-Fi? Hi, Diego. I use AZ-GTi in the same way: AZ-GTi + equatorial wedge & Canon with lens. All process fully automated within N.I.N.A. and guided PHD2 via Wi-Fi. Can't said something about maximum range. I putting setup quite closer to car (about 3-4 meters), and never have any problems with connection. |
7.14
#...
·
·
1
like
|
|---|
|
Yes you can guide it with Wi-Fi, connect through Synscan and then in Nina find the Synscan option in your Equipment/Mount tab. That said I recommend getting the AzGTI eqmod cable, it makes the connection more reliable. |
