AstroBinAstroBin

Crop settings for simulation on telescopious ZWO ASI585MC Pro · Javier · ... · 2 · 114 · 1

javieralso 0.00
Javier
...
· 
Hi,

I currently have a modded Nikon D5300 but I am considering getting a ZWO ASI585MC Pro. Before that, I'm doing some simulations on Telescopious to compare with my current one, but I'm not sure if I should set the crop factor to 1x or if I should increase it (as the ZWO has a sensor smaller than a "full-frame" camera).

What would be the right setting for this?

Thanks!!
Javier
Like
×

Sorry :-(

Editing a post is only allowed within 24 hours after creating it.
andreatax 7.90
andrea tasselli
...
· 
What cropping? None of the sort, you just enter the sensor info and you are set.
image.png
Like
×

Sorry :-(

Editing a post is only allowed within 24 hours after creating it.
javieralso 0.00
Javier
...
· 
Thanks @andrea tasselli

That's what I was suspecting, but I wasn't sure it would be the right setting. For my Nikon, apart from the sensor info, I also have to set up the cropping factor so I can have a very accurate simulation. If I leave the Cropping to 1x with that camera selected, the field of view on telescopious is larger than the actual one, hence my question.

Cheers,
Javier
Like
×

Sorry :-(

Editing a post is only allowed within 24 hours after creating it.
 
Register or login to create to post a reply.
×

Warning!

This operation will reload the current page. If you have any unsaved information in a form, it will be lost.

You can also dismiss this window, and your operation will be applied at the next page navigation.