Contains:  Gear
New Setup Picture, Quinn Groessl

New Setup Picture

New Setup Picture, Quinn Groessl

New Setup Picture

Description

Figured it's time for an updated picture of my gear. This is my C8/EQ6R-Pro set up. on it I have a 30" Dew Not strip and 3D printed dew shield. Then also A Beelink Mini S12 Pro PC and Pegasus Powerbox Micro. Those are mounted on a 3D printed bracket that's attached to the OTA with hook and loop fastener strips. ADM dovetail, ZWO EAF, ASI174mm Mini on the OAG-L, 36x7 ZWO filter wheel, and a ASI2600mm Pro for the main camera. One thing I kind of would like to add is a USB hub. I had one that didn't work very well, that's why there's a "tail" on the PC bracket.

For the other pictures, one shows a bit closer up on the PC and power box. The other shows the camera and things. Notable on that picture is how tight the spacing is between the EAF and the filter wheel. Most of the cables are shortened by myself. Kind of taught myself how to solder. It wasn't all that good, but it works. The red cable is the power in, so that's the only one that goes to the ground. I could probably tidy up the other cables a bit, but nothing snags so I'm happy.

Comments

Revisions

  • Final
    New Setup Picture, Quinn Groessl
    Original
  • New Setup Picture, Quinn Groessl
    B
  • New Setup Picture, Quinn Groessl
    C