7.56
#...
·
 |
|---|
|
Hello everyone, I'm trying to connect my Canon 1300D with NINA but the camera menu doesn't show the Canon option just Nikon. I've it on 3 different PCs and it is all the same, no Canons just Nikons. Yet the camera is seen from the OS and APT works just all-right with it. I might manage OK with APT but I'd try using NINA once more before I give up on it. Any advice welcome. |
0.90
#...
·
|
|---|
|
hello, canon and nina are sometimes strange. sometimes my canon is shown as "mtp..." or "mtu..." instead of "canon eos...". i think this depends (on my laptop) on which usb port the camera is connected. so try another usb port. regards wittinobi |
|
7.56
#...
·
·
1
like
|
|---|
| Actually, I found out what was. EOS utlity messing up the connection. Removed, all is fine. |
10.79
#...
·
|
|---|
|
I recommend using the ASCOM driver. There’s an issue with the integrated Canon driver which may freeze the camera and as far as I know, it hasn’t been fixed yet: https://github.com/vtorkalo/ASCOM.DSLR |
0.00
#...
·
·
1
like
|
|---|
Björn: I use an old 40D and yes NINA does freeze the camera, especially when exposing for platesolving or resuming exposures post meridian flip. I always blamed my old camera processor. Thank you for pointing towards the ascom.dslr! |
