AstroBin saves small pieces of text information (cookies) on your device in order to deliver better content and for statistical purposes. You can disable the usage of cookies by changing the settings of your browser. By browsing AstroBin without changing the browser settings, you grant us permission to store that information on your device.I agree
I am testing my new mount : the Sky-Watcher AZ-GTI GoTo mount.
I am sharing here my setup and my first tests.
What I was looking for...
- replacing both the Vixen Polarie mount and the Star Adventurer mount in one unique mount
- 2 motorized axes for easy motion, panoramas, 2 axes guiding...
- GoTo for targetting more easily small objects
- easy powered
At first sight the AZ-GTI is an alt-az mount so not suitable for photography.
Sky-Watcher has released a firmware to turn the mount into an equatorial mount.
The firmware was experimental at the beginning but now it seems to be a stable release. I thought it was the right moment to jump into new experiences.
Hardware (DSO setup)
- the AZ-GTI mount + tripod + extension tube (all this is in the full package)
- an equatorial wedge for easy polar alignement. You can use the Star Adventurer one.
Mine : link
[UPDATE] the chinese wedge was not very strong. Some play in it. I decided to upgrade to the William Optics wedge. Expensive but strong and very pleasant to use (link).
- a polar scope, attached in the blue support : link
There is no illumination so I can not see the reticle. Not needed for now in my process.
[UPDATE] I do not use the polar scope anymore in DSO setup. Sharpcap is enough.
- Samyang 135mm + ASI183MM Pro + ASI to Sony E mount adapter
adapter : link
[UPDATE] Now I use ASI183MM + ZWO Electronic Filter Wheel (small one) + Canon Samyang 135mm + adaptors.
- Datyson T7c camera (ASI120 clone) + 32mm guidescope
* guide scope : link
* pan/tilt head : link
NB : the guide scope may be better attached, using less weight (the pan/tilt head is heavy) but for now it does the job :)
- powering : from the manual it runs at 12V and it draws 750mA.
I have measured the power consumption with a multimeter : when tracking the mount draws about 50 mA. When the motors move at the highest speed the peak is about 300 mA.
* in the backyard a classic 12V wall converter will do the job
* on the go :
-- you can put 8 AA batteries inside the mount ; not very practical to charge 8 batteries but it may be useful one day
-- I have successfully tested this 5V->12V/1A converter, plugged to a USB power bank : link
-- of course a classic 12V power tank will fit. I have this one : link
- one PC running Windows 10, connected to the mount WIFI
- total weight on the mount is about 3.2 kg. The mount is rated for 5 kg.
Imaging workflow (DSO setup)
- polar alignement :
* rough alignement with polar scope : just putting Polaris in the scope.
* fine alignement : with Polar Align tool in Sharcap. Works great.
[UPDATE] Now i do not use the polar scope anymore when using Sharpcap. Going roughly manually while Sharpcap is solving is enough to be in the pole area.
- focusing : with Focus Assistant tool in Sharpcap
[UPDATE] I also focus by visually inspecting a star in the field, zooming at 400-600 %. With Samyang 135 at f/2.8 and 1.5 seconds exposure one can see if the star is focus or not.
- star alignement : with Sky-Watcher SynScan Pro app (PC or smartphone version).
[OLD] 2 stars alignment seems to be enough for this setup (FOV is 3.15° x 2.12°).
- targetting : with SynScan Pro app
[NEW] What i do now is :
* slew to target in SynScan, without doing star alignment
* take a picture with Sharpcap (~ 10 s)
* launch All Sky Plate Solver software, connect the mount, solve
* in SynScan, delete alignment model if any, click align with scan and go back in All Sky to sync
* disconnect mount in All Sky, slew to target again in SynScan
* If needed, repeat the steps before. For me one iteration is enough
- shooting : with Sharcap
- guiding : with PHD2
Use cases and results
Please note that these are my own first tests. This is not a complete review of what the mount can do.
For instance the tracking results could vary depending on the declination target.
- milky way landscape / timelapse setup : Sony A7s (unmod) + Samyang 24mm, tracked during 30"
* minimal setup (no guide scope, small plate, no counter shaft / weight).
* shot at f/2.8.
* resolution : 72.1" per pixel.
* looks no problem.
* only rough polar alignment (Polaris in scope).
- milky way close up / landscape / DSO scape / timelapse : Sony A7s + Samyang 135mm, tracked during 30"
* same minimal setup except that shaft and counterweight are needed !
* shot at f/2.8.
* resolution : 12.82" per pixel.
* only rough polar alignment (Polaris in scope)
To be confirmed. Maybe I was lucky and a better Polaris position in scope would be needed (this would require illumination to see the reticule)
* looks no problem, see pic D, close up in pic E.
- DSO setup, unguided light version
* no guide scope, no guiding camera.
* shot with 12 nm Ha filter, gain 180, sensor temperature 28°.
* focus not at the best in this test.
* resolution : 3.66" per pixel.
* polar alignement was "Excellent" in Sharcap.
* autostretched images. Looks nice until 60" (see pic F and close up in pic G). At 90" there was some trails.
- DSO setup, guided
* shot with 12 nm Ha filter, ASI178MM with gain 180, sensor temperature 27°.
* resolution : 3.66" per pixel.
* polar alignement was between "Fair" and "Good" in Sharcap => possible improvement here.
* PHD2 displayed a warning message after calibration => possible improvement here ?
* autostretched images.
* North America, 4 minutes : looks fine. See pic J and close up pic K.
* M31, 5 minutes : fine at 1:1 scale, pix L. However close up (pic M) shows not perfectly round stars.
North America and Pelican
M45 / Pleiades
It's just the beginning but for now I am happy with this mount.
A few points :
- It looks like a Star Adventurer with additionnal features.
- Need more tests to see the possible exposure limits.
- GoTo feature is very nice (and fun !). Endless plate solving for targetting is over ^^
Tadej Skofic's YouTube channel (setup tutorials and results) : link
David Parks's review on using the AZ-GTI with different devices (Windows PC, ASIAIR, and Stellarmate) : link
David Parks's full setup with 73mm APO : link
Giant thread on Cloudy Nights : link
polar scope support (blue part)
A7s + 135mm, 30"
A7s + 135mm, 30", close up
ASI178MM + 135mm (3.66" per pixel), 60" unguided
ASI178MM + 135mm (3.66" per pixel), 60" unguided, close up
ASI178MM + 135mm (3.66" per pixel), 4 minutes guided
ASI178MM + 135mm (3.66" per pixel), 4 minutes guided, close up
ASI178MM + 135mm (3.66" per pixel), 5 minutes guided
ASI178MM + 135mm (3.66" per pixel), 5 minutes guided, close up
|You have no new notifications.|
This page or operation is not available at the moment, because AstroBin is in READ ONLY mode. For more information, please check out our Twitter feed: https://twitter.com/AstroBin_com
If this image is the result of your processing of a public data pool, you can send it the pool so it's displayed there.
Use this form to select an existing public data pool.
If this image is the result of your processing of a private shared folder, you can send it the folder so it's displayed there.
Such limitation improves the website as a whole by discouraging people from creating fake accounts to like their own images. Thank you for understanding!
Currently, your AstroBin index is 0.00.