Contains:  Gear
My  setup and cable management, 



    
        

            Roy Hagen

My setup and cable management

Acquisition type: Lucky imaging
My  setup and cable management, 



    
        

            Roy Hagen

My setup and cable management

Acquisition type: Lucky imaging

Description

I usually sit behind the window and run the acquisition process from my iPad.
A telescope shroud is lying on the ground right behind the scope
The two mounting plates on both sides of the scope, are designed to support the electronic devices, a PPB and an ASIAIR.
The mounting plates are painted with red Hammerite paint and bolted to the saddle plate with Allen bolts and nuts+washers.
Some of the velcro bands are extra supplied with heavy duty doble sided adhesive tape for extra safety.
I bought a 12v 10Amp power supply with a 12v plug, (28$, at Amazon) for the electronic devices.
(Cheaper than material cost😱)
It allows me to plug both power and guide at the same side of the pier, and the three cables are gathered to one. I do not need to plug and unplug the PPB and the ASIAIR.

Comments

Revisions

  • My  setup and cable management, 



    
        

            Roy Hagen
    Original
  • My  setup and cable management, 



    
        

            Roy Hagen
    B
  • My  setup and cable management, 



    
        

            Roy Hagen
    C
  • My  setup and cable management, 



    
        

            Roy Hagen
    D
  • My  setup and cable management, 



    
        

            Roy Hagen
    E
  • My  setup and cable management, 



    
        

            Roy Hagen
    F
  • My  setup and cable management, 



    
        

            Roy Hagen
    G
  • Final
    My  setup and cable management, 



    
        

            Roy Hagen
    I
  • My  setup and cable management, 



    
        

            Roy Hagen
    J
  • My  setup and cable management, 



    
        

            Roy Hagen
    K

B

Description: The mounting plate attached to the saddle plate

Uploaded: ...

C

Description: The ASIAIR fastened to the mounting plate with Velcro

Uploaded: ...

D

Description: The Pegasus Pocket Power Box attached to the mounting plate with Velcro

Uploaded: ...

F

Description: Tp-link TL-WR902AC connected to Pegasus pocket power box via dc 12v to 5v converter

Uploaded: ...

G

Description: Tp-link TL-WR902AC connected to Asiair to improve wifi signal

Uploaded: ...

K

Description: 3D printed

Uploaded: ...

Histogram

My  setup and cable management, 



    
        

            Roy Hagen