Hello
I`m thinking of purchasing a Skywatcher 250 Quattro but i`m not sure how i`d connect my QHY 168C to a coma corrector. Can anyone push me in the right direction of adaptors i`d possibly need? I`m currently using an 8" RC @ f8 but i`m tempted to try a fast newtionian....
Thanks for reading Alan
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
It should have been furnished with a M54/T-Thread adapter with which you would normally attach most CC. Does it have one?
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Yes i have it. Would it give me the 55 mm backfocus though?
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Alan Hancox: Yes i have it. Would it give me the 55 mm backfocus though? No, it won't. The M54 to sensor distance is 18mm plus the T-Thread adapter thickness. The difference you'll need to make up for using spacer rings.
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
to create to post a reply.