0.00
#... |
---|
Hi all, I currently have a 100mm APO refractor on a Sky-Watcher EQ6-R Pro mount. I am considering options for a second OTA of longer focal length. I have found a premium carbon fibre 10" f/5 Newtonian astrograph but I'm not sure how it would go on my mount. Does anyone have experience with a similar combination of a 10" Newtonian on an EQ6-R or equivalent? Thanks, Kevin |
0.00
#... |
---|
8) |
0.00
#... |
---|
Haha Diego, You know what I'm talking about... If there is a good response to my post you might see an order coming through... ;) |
0.00
#... |
---|
HI Kevin, i have that exact mount and run a setup with an 8 inch newtonian, guidescope and rather heavy Sbig camera with large filterwheel without any problem. depending on the weight of the scope youre getting obviously, i think you would be fine. mines a carbon tube tho, so is def lighter than steel. 10inch steel would be pretty heavy. the most concerning thing I've noticed with large newtonians is wind. Its a rather big surface area and catches a lot of wind causing some pretty bad vibrations.if youre in a dome thats obviously not a problem. But check the weight of the tube, add the weight of all your accessories and check that against maximum payload of the mount to begin with! cheers Rob |
0.00
#... |
---|
I run skywatcher exploer 250pds on eq6. It's doable, but very very sensitive to wind. Needs 3 CW's a the very end of CW shaft |