Hi,
I’m taking lights, darks, bias, flats and dark-flats but when stacking with WBPP I don’t know how to use de dark-flats. Maybe I have to upload them with the other darks and WBPP will understand that they will be used to callibrate flats?
Many thanks and clear skies!
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Yes, I use both. The way to do it is : upload all your Darks in the Darks tab, then on the Calibration tab, you can select each serie of images you imported, and on the right side let Pixinsight choose automatically its Darks, or select the serie manually.
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Dark flats get loaded with the darks in WBPP. However, you don’t need both bias frames and dark flat frames. Use one or the other. I never heard of using both.
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Here below you see that PI can automatically check that your Darks have different exposition time
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Jérémie: Yes, I use both. The way to do it is : upload all your Darks in the Darks tab, then on the Calibration tab, you can select each serie of images you imported, and on the right side let Pixinsight choose automatically its Darks, or select the serie manually. Interesting, why use both bias and dark flats?
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Here you see that selecting the Flats, I can choose which Darks serie to use. You can do the same with the Lights. That can be useful if you integrate Lights coming from various nights and with various exposure time (Darks would be different).
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Bruce Donzanti:
Jérémie: Yes, I use both. The way to do it is : upload all your Darks in the Darks tab, then on the Calibration tab, you can select each serie of images you imported, and on the right side let Pixinsight choose automatically its Darks, or select the serie manually. Interesting, why use both bias and dark flats? I don't take Bias.
I use Darks for everything : Bias is included in the Darks, so when you subtract the Darks, Bias is automatically subtracted as well... When Flats have short exposure time, well, Bias or Dark is the same
The only drawback of my method is that you cannot "tweak' the Darks. But I wouldn't do it in any case so....
I think I remember that not using bias was the prefered / recomended way of doing things by PI. I would have to check, but there has been lots of discussions on that few years ago.
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Hello Daniel,
I use only Darks with the same flat exposer time.
At the following link there is a good discription why this works wthout problem.
Look the text from Frank and Gerd https://www.astrotreff.de/forum/index.php?thread/232976-was-sind-flat-dark-frames-fragen-zu-regim/
Cs Mani Sorry for my uncorrect english !)
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Jérémie:
Bruce Donzanti:
Jérémie: Yes, I use both. The way to do it is : upload all your Darks in the Darks tab, then on the Calibration tab, you can select each serie of images you imported, and on the right side let Pixinsight choose automatically its Darks, or select the serie manually. Interesting, why use both bias and dark flats? I don't take Bias.
I use Darks for everything : Bias is included in the Darks, so when you subtract the Darks, Bias is automatically subtracted as well... When Flats have short exposure time, well, Bias or Dark is the same
The only drawback of my method is that you cannot "tweak' the Darks. But I wouldn't do it in any case so....
I think I remember that not using bias was the prefered / recomended way of doing things by PI. I would have to check, but there has been lots of discussions on that few years ago. Ok- I misunderstood. I thought you were taking both. I believe you are correct about dark flats in PI being preferred in PI, especially with the CMOS cameras.
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Thank you @Jérémie
Bruce Donzanti:
Jérémie: Yes, I use both. The way to do it is : upload all your Darks in the Darks tab, then on the Calibration tab, you can select each serie of images you imported, and on the right side let Pixinsight choose automatically its Darks, or select the serie manually. Interesting, why use both bias and dark flats? Why not @Bruce Donzanti ?
If I’m not wrong bias are used to callibrate electronical noise. Darks are used to callibrate lights with flats but if flats exposures are more that one second we’ll need dark-flats to callibrate them.
Am I making any mistake?
Kind regards
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Bruce Donzanti:
Jérémie:
Bruce Donzanti:
Jérémie: Yes, I use both. The way to do it is : upload all your Darks in the Darks tab, then on the Calibration tab, you can select each serie of images you imported, and on the right side let Pixinsight choose automatically its Darks, or select the serie manually. Interesting, why use both bias and dark flats? I don't take Bias.
I use Darks for everything : Bias is included in the Darks, so when you subtract the Darks, Bias is automatically subtracted as well... When Flats have short exposure time, well, Bias or Dark is the same
The only drawback of my method is that you cannot "tweak' the Darks. But I wouldn't do it in any case so....
I think I remember that not using bias was the prefered / recomended way of doing things by PI. I would have to check, but there has been lots of discussions on that few years ago. Ok- I misunderstood. I thought you were taking both. I believe you are correct about dark flats in PI being preferred in PI, especially with the CMOS cameras. Well, reading everything again, I misunderstood the initial question, hence my answer that was indeed not very clear |
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Hi Daniel, I highly recommend Adam Block youtube tutorials (The definitive guide to WBPP). Very detailed and all questions will be answered.
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Yes. I use a master dark and dark flats, no bias frames. Simply load your master dark and your dark flats and let WBPP do the rest.
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Daniel Arenas: Hi,
I’m taking lights, darks, bias, flats and dark-flats but when stacking with WBPP I don’t know how to use de dark-flats. Maybe I have to upload them with the other darks and WBPP will understand that they will be used to callibrate flats?
Many thanks and clear skies! Dark flats are darks with the exposure time of the flats. By default WBPP uses the exposure time to choose the proper darks for calibration. So it calibrates the flats with the darks with same exposure time. When using darks you don't need bias frames because the darks contain the read noise too, so when subtracting the master dark from lights / flats you subtract the average read noise in the process.
Clear skies Wolfgang
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Rob Kiefer: Hi Daniel, I highly recommend Adam Block youtube tutorials (The definitive guide to WBPP). Very detailed and all questions will be answered. Yes I do that with subtitles cause english is not my native language and the speed of speaking is an issue on me.
Let me edit this message:
I was confused with the author, Adam has a great pronnounce accent and tempo. I’ll review those videos.
Thanks! 🤗
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Daniel Arenas: Hi,
I’m taking lights, darks, bias, flats and dark-flats but when stacking with WBPP I don’t know how to use de dark-flats. Maybe I have to upload them with the other darks and WBPP will understand that they will be used to callibrate flats?
Many thanks and clear skies! Dark flats are darks with the exposure time of the flats. By default WBPP uses the exposure time to choose the proper darks for calibration. So it calibrates the flats with the darks with same exposure time. When using darks you don't need bias frames because the darks contain the read noise too, so when subtracting the master dark from lights / flats you subtract the average read noise in the process.
Clear skies Wolfgang
Great @kuechlew ! That have a lot o sense 🙌
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
to create to post a reply.