Hi guys.
I thought I'd share some pics of my new Pegasus Power Saddle on an AM5 so you don't have to spend the exorbitant amount of money I have ;-)
I've literally had this 5 mins so have yet to see first-light - but happy to answer any questions if I am able to.
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
In order to mount on the AM5 you need to buy an additional "puck":
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
This is what's under the AM5 saddle: |
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Some comparison shots - the Power saddle is shorter and slightly wider:
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
The puck mounted. Here's I've re-used the AM5 bolts but this actually doesn't work as they stick out slghtly. The puck ships with the correct bolts though, so I have since fixed.
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
And finally some glamour shots.
Here's I've mounted the power saddle with the tightening knobs on the opposite side as the AM5 saddle so that the power input on the saddle is right next to the power output on the AM5. I have since switched it back to the same orientation as the AM5 saddle because it does not fit in the AM5 case otherwise (and even then, I am still going to have to cut out some of the foam in the case to make it fit.
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
Looks very interesting! Would love to see it in action -- wired up.
|
You cannot like this item. Reason: "ANONYMOUS".
You cannot remove your like from this item.
Editing a post is only allowed within 24 hours after creating it.
You cannot Like this post because the topic is closed.
to create to post a reply.